黑料网大事记
Back to
Dr Amar Khennane

Dr Amar Khennane

Senior Lecturer
黑料网大事记 Canberra
School of Eng & Tech

Research Experience
听

  • Bio-Cementitious materials
  • Composite materials
  • Timber
  • Reinforced concrete
  • Hybrid Structure
  • Publications - Books: 2, 听Peer-reviewed Journal papers: 47, Conference Papers: 33 Other: 6


Teaching Experience

Structural Analysis

Finite Element Method

Reinforced Concrete

Stress/Strain Analysis

http://au.mathworks.com/support/books/book118765.html

Additional Experience
听

  • Maitre de Conferences (Tizi-Ouzou, Algeria)
  • Research Associate (Newcastle, Australia)
  • Lecturer/Senior Lecturer (USQ, Australia)

听
Phone
+61 2 5114 5165
E-mail
a.khennane@adfa.edu.au
Location
Building 20 Room 131 School of Engineering and Information Technology, The University of New South Wales, Australian Defence Force Academy, PO Box 7916, Canberra BC ACT 2610, AUSTRALIA
  • Books | 2013
    Khennane A, 2013, Introduction to Finite Element Analysis Using MATLAB (R) and Abaqus Introduction, CRC PRESS-TAYLOR & FRANCIS GROUP
    Books | 2013
    Khennane A, 2013, Introduction to Finite Element Analysis Using MATLAB (R) and Abaqus Preface, CRC PRESS-TAYLOR & FRANCIS GROUP
    Books | 2013
    Khennane A, 2013, Introduction to Finite Element Analysis Using MATLAB庐 and Abaqus, CRC Press (Taylord and Francis Group), Boca Raton Florida, USA,
  • Book Chapters | 2025
    Gigar FZ; Khennane A; Liow JL; Al-Deen S; Tekle BH; Fitzgerald CJ; Basaglia A; Webster C, 2025, 'Advancing Sustainable Construction Materials: Wood and Rubber Geopolymer Masonry Mix Development', in , pp. 889 - 897,
    Book Chapters | 2025
    Gigar FZ; Khennane A; Liow JL; Li Z; Tekle BH, 2025, 'Structural behaviour of wood-geopolymer cement masonry prisms', in Engineering Materials, Structures, Systems and Methods for a More Sustainable Future, CRC Press, pp. 1475 - 1480,
    Book Chapters | 2025
    Gigar FZ; Khennane A; Liow JL; Li Z; Tekle BH, 2025, 'Structural behaviour of wood-geopolymer cement masonry prisms', in Engineering Materials, Structures, Systems and Methods for a More Sustainable Future, CRC Press, pp. 523 - 524,
    Book Chapters | 2025
    Gigar FZ; Kuang ZY; Wang H; Khennane A; Workeluel NA; Li Z; Tekle BH, 2025, 'Experimental investigation of fibre reinforced engineered cementitious composite short deep beam under static and impact loading', in Engineering Materials, Structures, Systems and Methods for a More Sustainable Future, CRC Press, pp. 257 - 258,
    Book Chapters | 2025
    Gigar FZ; Kuang ZY; Wang H; Khennane A; Workeluel NA; Li Z; Tekle BH, 2025, 'Experimental investigation of fibre reinforced engineered cementitious composite short deep beam under static and impact loading', in Engineering Materials, Structures, Systems and Methods for a More Sustainable Future, CRC Press, pp. 734 - 738,
    Book Chapters | 2025
    Workeluel NA; Judge D; Dura HB; Gigar FZ; Khennane A; Li Z, 2025, 'Finite element modelling of 2.5D metastructures with varying Poisson's ratios', in Engineering Materials, Structures, Systems and Methods for a More Sustainable Future, CRC Press, pp. 1043 - 1048,
    Book Chapters | 2025
    Workeluel NA; Judge D; Dura HB; Gigar FZ; Khennane A; Li Z, 2025, 'Finite element modelling of 2.5D metastructures with varying Poisson's ratios', in Engineering Materials, Structures, Systems and Methods for a More Sustainable Future, CRC Press, pp. 369 - 370,
    Book Chapters | 2024
    Liow JL; Khennane A; Gigar FZ; Katoozi E, 2024, 'Recycled Wood-Geopolymer Concrete Blocks as Sustainable Material', in , pp. 1585 - 1595,
    Book Chapters | 2023
    Gigar FZ; Khennane A; Liow JL; Tekle BH, 2023, 'Effect of Wood/Binder Ratio, Slag/Binder Ratio, and Alkaline Dosage on the Compressive Strength of Wood-Geopolymer Composites', in , pp. 658 - 667,
    Book Chapters | 2023
    Pignatta G, 2023, 'Leachability of spent chromated copper arsenate (CCA) treated wood encapsulated in geopolymer cement', in , Springer, pp. 657 - 666,
    Book Chapters | 2022
    Liow JL; Khennane A; Muley M; Sorial H; Katoozi E, 2022, 'Recycling of Chrome-Copper-Arsenic Timber Through Cement Particleboard Manufacture', in Sustainable Production Life Cycle Engineering and Management, pp. 111 - 122,
    Book Chapters | 2013
    , 2013, 'Axisymmetric Problems', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 383 - 408,
    Book Chapters | 2013
    , 2013, 'Bar Element', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 35 - 92,
    Book Chapters | 2013
    , 2013, 'Beam Element', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 93 - 136,
    Book Chapters | 2013
    , 2013, 'Finite Element Approximation', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 221 - 240,
    Book Chapters | 2013
    , 2013, 'Introduction', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 31 - 34,
    Book Chapters | 2013
    , 2013, 'Numerical Integration', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 241 - 260,
    Book Chapters | 2013
    , 2013, 'Plane Problems', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 261 - 382,
    Book Chapters | 2013
    , 2013, 'Rigid Jointed Frames', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 137 - 164,
    Book Chapters | 2013
    , 2013, 'Stress and Strain Analysis', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 165 - 204,
    Book Chapters | 2013
    , 2013, 'Thin and Thick Plates', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 409 - 448,
    Book Chapters | 2013
    , 2013, 'Weighted Residual Methods', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 205 - 220,
    Book Chapters | 2013
    Bai J; Frollini E; Silva CG; Ramires EC; Miskolczi N; Sarasini F; Santulli C; Fiore V; Valenza A; Pansart S; Bickerton S; Govignon Q; Kelly P; Khennane A; Correia JR; Al-Shawaf A; Guedes RM; Xavier J; Benzarti K; Colin X; Turvey GJ; Fahmy MFM; Panzera TH; Christoforo AL; Ribeiro Borges PH; Hollaway LC; Taheri F; Zainuddin S; Hosur MV; Jeelani S; Kumar A; Trovillion J; Cust贸dio J; Laborat贸rio Nacional de SC-F, 2013, 'Contributor contact details', in Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications, Elsevier, pp. xv - xviii,
    Book Chapters | 2013
    Khennane A, 2013, '8 Filament winding processes in the manufacture of advanced fibre-reinforced polymer (FRP) composites', in Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications, Elsevier, pp. 187 - 206,
    Book Chapters | 2013
    Khennane A, 2013, 'Axisymmetric Problems', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 353 - 377
    Book Chapters | 2013
    Khennane A, 2013, 'Bar Element', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 5 - 61
    Book Chapters | 2013
    Khennane A, 2013, 'Beam Element', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 63 - 105
    Book Chapters | 2013
    Khennane A, 2013, 'Filament Winding Processes in the Manufacture of Advanced Fibre-Reinforced Polymer (FRP) Composites', in Advanced fbre-reinforced polymer (FRP) composites for structural applications, WP Woodhead Publishing, Oxford, pp. 187 - 206,
    Book Chapters | 2013
    Khennane A, 2013, 'Finite Element Approximation', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 191 - 210
    Book Chapters | 2013
    Khennane A, 2013, 'Numerical Integration', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 211 - 230
    Book Chapters | 2013
    Khennane A, 2013, 'Plane Problems', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 231 - 351
    Book Chapters | 2013
    Khennane A, 2013, 'Rigid Jointed Frames', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 107 - 134
    Book Chapters | 2013
    Khennane A, 2013, 'Stress and Strain Analysis', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 135 - 174
    Book Chapters | 2013
    Khennane A, 2013, 'Thin and Thick Plates', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 379 - 418
    Book Chapters | 2013
    Khennane A, 2013, 'Weighted Residual Methods', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 175 - 189
    Book Chapters | 2013
    2013, 'Introduction', in Introduction to Finite Element Analysis Using MATLAB庐 and Abaqus, CRC Press,
  • Journal articles | 2024
    Elbana A; Khennane A; Hazell PJ, 2024, 'Multiscale modelling of particulate composites with spherical inclusions', Engineering with Computers, 40, pp. 3087 - 3113,
    Journal articles | 2024
    Gigar FZ; Khennane A; Liow JL; Al-Deen S; Tekle BH; Fitzgerald CJ; Basaglia A; Webster CL, 2024, 'Advancing Sustainable Construction Materials: Wood, Rubber, and Cenospheres Geopolymer Masonry Units Development', Sustainability Switzerland, 16,
    Journal articles | 2024
    Gigar FZ; Khennane A; Liow JL; Tekle BH; Li Z, 2024, 'Characterisation of a novel sustainable wood-geopolymer masonry units', Developments in the Built Environment, 20,
    Journal articles | 2024
    Khelifa M; Thi VD; Oudj猫ne M; Khennane A; El Ganaoui M; Rogaume Y, 2024, 'Modelling the Response of Timber Beams Under Fire', International Journal of Civil Engineering, 22, pp. 1537 - 1549,
    Journal articles | 2024
    Khelifa M; Tran TT; Khennane A; Oudjene M; Rogaume Y, 2024, 'Thermal response of timber connections using densified wood dowels under fire', Journal of Fire Sciences, 42, pp. 534 - 550,
    Journal articles | 2024
    Yi D; Khennane A; Pan Y; Fan Y, 2024, 'Uniaxial constitutive models for wood under cyclic compression loads with varying loading orientations', Engineering Fracture Mechanics, 304,
    Journal articles | 2023
    Gigar FZ; Khennane A; Liow JL; Tekle BH; Katoozi E, 2023, 'Recycling timber waste into geopolymer cement bonded wood composites', Construction and Building Materials, 400,
    Journal articles | 2023
    Pan Y; Yi D; Khennane A; Chen J, 2023, 'Seismic performance of a historic timber structure on a slope', Journal of Building Engineering, 71,
    Journal articles | 2022
    Khelifa M; Khennane A; Oudjene M, 2022, 'Modelling of Strengthened Steel Connections under Static and Cyclic Loading', Buildings, 12,
    Journal articles | 2022
    Khennane A; Reza W; Khelifa M, 2022, 'FLEXURAL BEHAVIOR OF A BRACED HYBRID STEEL-TIMBER BEAM', Proceedings of International Structural Engineering and Construction, 9,
    Journal articles | 2022
    Tran TT; Khennane A; Khelifa M; Girods P; Oudjene M; Rogaume Y, 2022, 'Application of kinetic pyrolysis models to the analysis of flax chipboards under fire', Case Studies in Construction Materials, 16, pp. e00873,
    Journal articles | 2021
    Li Z; Ameri AAH; Hazell PJ; Khennane A; Escobedo-Diaz JP; Aryal B; Wang H, 2021, 'Effects of impactor mass on the low-velocity impact behaviour of thick GFRP pultruded laminates', Construction and Building Materials, 279,
    Journal articles | 2020
    Pathak S; Khennane A; Al-Deen S, 2020, 'Power based seismic collapse criterion for ductile and non-ductile framed structures', Bulletin of Earthquake Engineering, 18, pp. 5983 - 6014,
    Journal articles | 2020
    Pathak S; Khennane A; Watt S; Al-Deen S, 2020, 'Effectiveness of physics-based collapse criteria in seismic risk assessment of code-conforming low-rise RC framed structures', Structures, 27, pp. 440 - 461,
    Journal articles | 2020
    Pathak S; Watt S; Khennane A; Al-Deen S, 2020, 'Dynamical systems approach for the evaluation of seismic structural collapse and its integration into PBEE framework', Soil Dynamics and Earthquake Engineering, 135, pp. 106184,
    Journal articles | 2020
    Tekle BH; Cui Y; Khennane A, 2020, 'Bond properties of steel and sand-coated GFRP bars in Alkali activated cement concrete', Structural Engineering and Mechanics, 75, pp. 123 - 131,
    Journal articles | 2020
    Tekle BH; Khennane A, 2020, 'Parametric study on bond of GFRP bars in alkali-activated cement concrete', Magazine of Concrete Research, 72, pp. 670 - 680,
    Journal articles | 2019
    Illouli S; Sadaoui A; Khennane A, 2019, 'Application of the theory statically indeterminate structures of infinite degree to a cable-truss footbridge under lateral forces', Engineering Structures, 188, pp. 665 - 676,
    Journal articles | 2019
    Li M; Khelifa M; Khennane A; El Ganaoui M, 2019, 'Structural response of cement-bonded wood composite panels as permanent formwork', Composite Structures, 209, pp. 13 - 22,
    Journal articles | 2018
    Li M; Khennane A; Brandelet B; El Ganaoui M; Khelifa M; Rogaume Y, 2018, 'Modelling of heat transfer through permanent formwork panels exposed to high temperatures', Construction and Building Materials, 185, pp. 166 - 174,
    Journal articles | 2018
    Li Z; Khennane A; Hazell PJ; Remennikov AM, 2018, 'Performance of a hybrid GFRP-concrete beam subject to low-velocity impacts', Composite Structures, 206, pp. 425 - 438,
    Journal articles | 2017
    Li Z; Khennane A; Hazell PJ; Brown AD, 2017, 'Impact behaviour of pultruded GFRP composites under low-velocity impact loading', Composite Structures, 168, pp. 360 - 371,
    Journal articles | 2017
    Sadaoui A; Lattari K; Khennane A, 2017, 'Effects of temperature changes on the behaviour of a cable truss system', Journal of Constructional Steel Research, 129, pp. 111 - 118,
    Journal articles | 2017
    Tekle BH; Khennane A; Kayali O, 2017, 'Bond behaviour of GFRP reinforced geopolymer cement concrete', MATEC Web of Conferences, 120,
    Journal articles | 2017
    Tekle BH; Khennane A; Kayali O, 2017, 'Bond behaviour of GFRP reinforcement in alkali activated cement concrete', Construction and Building Materials, 154, pp. 972 - 972,
    Journal articles | 2017
    Tekle BH; Khennane A; Kayali O, 2017, 'Bond of spliced GFRP reinforcement bars in alkali activated cement concrete', Engineering Structures, 147, pp. 740 - 751,
    Journal articles | 2016
    Khelifa M; Khennane A; El Ganaoui M; Celzard A, 2016, 'Numerical damage prediction in dowel connections of wooden structures', Materials and Structures Materiaux Et Constructions, 49, pp. 1829 - 1840,
    Journal articles | 2016
    Khennane A; Kayali O; Junaid MT, 2016, 'Response of alkali activated low calcium fly-ash based geopolymer concrete under compressive load at elevated temperatures', Materials and Structures (2017) 50:50, 50,
    Journal articles | 2016
    Sadaoui A; Lattari K; Khennane A, 2016, 'A novel analytical method for the analysis of a bi-concave cable-truss footbridge', Engineering Structures, 123, pp. 97 - 107,
    Journal articles | 2016
    Tekle BH; Khennane A; Kayali O, 2016, 'Bond properties of sand-coated GFRP bars with fly ash-based geopolymer concrete', Journal of Composites for Construction, 20, pp. 04016025,
    Journal articles | 2016
    Yu YUGUO; Khennane A; Zhang Y, 2016, 'Numerical modelling of degradation of cement paste under external sulfate attack', Applied Mechanics and Materials, 846, pp. 127 - 132,
    Journal articles | 2015
    Ferdous W; Manalo A; Khennane A; Kayali O, 2015, 'Geopolymer concrete-filled pultruded composite beams - Concrete mix design and application', Cement and Concrete Composites, 58, pp. 1 - 13,
    Journal articles | 2015
    Junaid MT; Kayali O; Khennane A; Black J, 2015, 'A mix design procedure for low calcium alkali activated fly ash-based concretes', Construction and Building Materials, 79, pp. 301 - 310,
    Journal articles | 2015
    Junaid MT; Khennane A; Kayali O, 2015, 'Performance of fly ash based geopolymer concrete made using non-pelletized fly ash aggregates after exposure to high temperatures', Materials and Structures Materiaux Et Constructions, 48, pp. 3357 - 3365,
    Journal articles | 2015
    Khelifa M; Khennane A; El Ganaoui M; Celzard A, 2015, 'Erratum to: Numerical damage prediction in dowel connections of wooden structures (Materials and Structures, DOI: 10.1617/s11527-015-0615-5)', Materials and Structures Materiaux Et Constructions, 49, pp. 1841 - 1842,
    Journal articles | 2015
    Khennane A; Khelifa M; El Ganaoui M, 2015, 'Numerical modelling of 3D dowelled timber joints using advanced fully coupled hydro-mechanical constitutive equations', Mechanics & Industry, 16, pp. 501 - 501,
    Journal articles | 2015
    Li Z; Khennane A; Hazell PJ, 2015, 'Numerical Investigation of a Hybrid FRP-Geopolymer Concrete Beam', Applied Mechanics and Materials, 846, pp. 452 - 457,
    Journal articles | 2015
    Yu Y; Zhang YX; Khennane A, 2015, 'Numerical modelling of degradation of cement-based materials under leaching and external sulfate attack', Computers and Structures, 158, pp. 1 - 14,
    Journal articles | 2014
    Chakrabortty A; Khennane A, 2014, 'l Failure mechanisms of hybrid FRP-concrete beams with external filament-wound wrapping', ADVANCES IN CONCRETE CONSTRUCTION, 2, pp. 57 - 75,
    Journal articles | 2014
    Junaid MT; Khennane A; Kayali O; Sadaoui A; Picard D; Fafard M, 2014, 'Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures', Cement and Concrete Research, 60, pp. 24 - 29,
    Journal articles | 2014
    Khelifa M; Khennane A; El Ganaoui M; Rogaume Y, 2014, 'Analysis of the behavior of multiple dowel timber connections in fire', Fire Safety Journal, 68, pp. 119 - 128,
    Journal articles | 2014
    Khelifa M; Khennane A, 2014, 'Numerical analysis of the cutting forces in timber', Journal of Engineering Mechanics, 140, pp. 523 - 530,
    Journal articles | 2014
    Khelifa M; Vila Loperena N; Bleron L; Khennane A, 2014, 'Analysis of CFRP-strengthened timber beams', Journal of Adhesion Science and Technology, 28, pp. 1 - 14,
    Journal articles | 2014
    Khennane A; Khelifa M; Bleron L; Viguier J, 2014, 'Numerical modelling of ductile damage evolution in tensile and bending tests of timber structures', Mechanics of Materials, 68, pp. 228 - 236,
    Journal articles | 2013
    Islam S; Khennane A, 2013, 'Computer Aided Design of RC Structures', International Journal of Concrete Structures and Materials, 7, pp. 127 - 133,
    Journal articles | 2012
    Sadaoui A; Khennane A, 2012, 'Effect of Transient Creep on Behavior of Reinforced Concrete Beams in Fire', ACI Materials Journal, 109, pp. 606 - 616,
    Journal articles | 2011
    Chakrabortty A; Khennane A; Kayali O; Morozov EV, 2011, 'Performance of outside filament-wound hybrid FRP-concrete beams', Composites Part B - Engineering, 42, pp. 907 - 915,
    Journal articles | 2010
    Dahmani L; Khennane A; Kaci S, 2010, 'Crack identification in reinforced concrete beams using ANSYS software', Strength of Materials, 42, pp. 232 - 240,
    Journal articles | 2010
    Khennane A, 2010, 'Manufacture and testing of a hybrid beam using a pultruded profile and high strength concrete', Australian Journal of Structural Engineering, 10, pp. 145 - 156,
    Journal articles | 2009
    Dahmani L; Khennane A; Kaci S, 2009, 'Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements', Strength of Materials, 41, pp. 423 - 430,
    Journal articles | 2009
    Sadaoui A; Khennane A, 2009, 'Effect of transient creep on the behaviour of reinforced concrete columns in fire', Engineering Structures, 31, pp. 2203 - 2208,
    Journal articles | 2007
    Khelifa M; Oudjene M; Khennane A, 2007, 'Fracture in sheet metal forming: Effect of ductile damage evolution', Computers and Structures, 85, pp. 205 - 212,
    Journal articles | 2007
    Khelifa M; Oudjene M; Khennane A, 2007, 'Fracture in sheet metal forming: effect of ductile damage evolution', Computers and Structures, 85, pp. 205 - 212
    Journal articles | 2007
    Khennane A; Sadaoui A; Kaci S, 2007, 'Behaviour of reinforced concrete frames in a fire environment including transitional thermal creep', Australian Journal of Structural Engineering, 7, pp. 167 - 184
    Journal articles | 2007
    Mai-duy N; Khennane A; Tran-Cong T, 2007, 'Computation of Laminated Composites Using Integrated Radial Basis Function Networks', CMC, Computers, Materials and Continua, 5, pp. 63 - 78
    Journal articles | 2007
    Sadaoui A; Kaci S; Khennane A, 2007, 'Nonlinear Analysis of Reinforced Concrete Frames in a Fire Environment', Australian Journal of Structural Engineering, 7, pp. 167 - 184
    Journal articles | 2006
    Springolo M; Khennane A; Van Erp G, 2006, 'Design and analysis of a composite beam for infrastructure applications - Part III: Experimental results and non-linear FE analysis', International Journal of Materials and Product Technology, 25, pp. 331 - 346,
    Journal articles | 2006
    Springolo M; Khennane A; van Erp G, 2006, 'Design and analysis of a composite beam for infrastructure applications. Part I: Preliminary investigation in bending', International Journal of Materials and Product Technology, 25, pp. 331 - 346
    Journal articles | 2006
    Springolo M; Van Erp G; Khennane A, 2006, 'Design and analysis of a composite beam for infrastructure applications - Part I: Preliminary investigation in bending', International Journal of Materials and Product Technology, 25, pp. 297 - 312,
    Journal articles | 2006
    Springolo M; Van Erp G; Khennane A, 2006, 'Design and analysis of a composite beam for infrastructure applications - Part II: Preliminary investigation in shear and torsion', International Journal of Materials and Product Technology, 25, pp. 313 - 330,
    Journal articles | 2005
    Khennane A; Melchers R, 2005, 'A micromechanics model for environmental stress-corrosion in GFRP', International Journal of Materials and Product Technology, 19
    Journal articles | 2005
    Khennane A, 2005, 'Performance based design of reinforced concrete with professional finite element software', Journal of the International Federation of Concrete (FIB), 6, pp. 141 - 147
    Journal articles | 2005
    Khennane A, 2005, 'Performance design of reinforced concrete slabs using commercial finite element software', Structural Concrete, 6, pp. 141 - 147,
    Journal articles | 2003
    Khennane A; Melchers R, 2003, 'Durability of Glass Polymer Composites Subject to Stress Corrosion', ASCE journal of composites for construction, 7, pp. 109 - 117
    Journal articles | 2003
    Khennane A; Melchers RE, 2003, 'A micromechanics model for environmental stress corrosion in GFRP', International Journal of Materials and Product Technology, 19, pp. 2 - 14,
    Journal articles | 1997
    Kaci S; Khennane A, 1997, 'Temperature effects on the creep and dynamic behaviors of Kevlar prestressing cables', Canadian Journal of Civil Engineering, 24, pp. 431 - 437,
    Journal articles | 1993
    Khennane A; Baker G, 1993, 'Uniaxial model for concrete under variable temperature and stress', Journal of Engineering Mechanics, 119, pp. 1507 - 1525,
    Journal articles | 1992
    KHENNANE A; BAKER G, 1992, 'THERMOPLASTICITY MODEL FOR CONCRETE UNDER TRANSIENT TEMPERATURE AND BIAXIAL STRESS', PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 439, pp. 59 - 80,
    Journal articles | 1992
    Khennane A; Baker G, 1992, 'Plasticity models for the biaxial behaviour of concrete at elevated temperatures, Part I: Failure criterion', Computer Methods in Applied Mechanics and Engineering, 100, pp. 207 - 223,
    Journal articles | 1992
    Khennane A; Baker G, 1992, 'Plasticity models for the biaxial behaviour of concrete at elevated temperatures, Part II: Implementation and simulation tests', Computer Methods in Applied Mechanics and Engineering, 100, pp. 225 - 248,
  • Conference Papers | 2024
    Gigar FZ; Khennane A; Liow JL; Tekle BH; Li Z, 2024, 'Development of wood-geopolymer composites for masonry units: Effect of alkaline solution ratio and wood type', in Fib Symposium, pp. 860 - 869
    Conference Papers | 2024
    Li Z; Rawat S; Hazell P; Tekle BH; Liu Z; Khennane A; Wang H, 2024, 'Flexural Performance of a Pultruded GFRP Short Beam with Reinforced Concrete Infill', in International Conference on Civil Structural and Transportation Engineering,
    Preprints | 2023
    Khennane A; Gigar FZ; Liow J-L; Tekle BH; Katoozi E, 2023, Recycling Timber Waste into Geopolymer Cement Bonded Wood Composites,
    Conference Papers | 2023
    Tekle BH; Messerer D; Holschemacher K; Khennane A, 2023, 'BOND BEHAVIOR OF TEXTILE REINFORCED FINE-GRAINED ALKALI ACTIVATED CEMENT CONCRETE', in Cice 2023 11th International Conference on Frp Composites in Civil Engineering
    Conference Papers | 2022
    Elbana A; Khennane A; Al-Deen S; Junaid MT, 2022, 'Multi-Scale Modelling of Particulate Composite', in The 3rd Built Environment Research Forum, MDPI, pp. 23 - 23, presented at Built Environment Research Forum,
    Conference Papers | 2022
    Pignatta G, 2022, 'Leachability of spent chromated copper arsenate (CCA) treated wood encapsulated in geopolymer cement', in Mediterranean Architecture and the Green-Digital Transition: Selected Papers from the World Renewable Energy Congress Med Green Forum 2022, Springer, Florence, Italy, pp. 657 - 666, presented at Med Green Forum 2022, Florence, Italy, 20 July 2022 - 22 July 2022,
    Conference Papers | 2022
    Reza W; Khennane A; Khelifa M, 2022, 'FLEXURAL BEHAVIOR OF A BRACED HYBRID STEEL-TIMBER BEAM', in Proceedings of International Structural Engineering and Construction, pp. TCC-01-1-TCC-01-6,
    Conference Papers | 2021
    Li Z; Khennane A; Wang H; Hazell P; Escobedo-Diaz J, 2021, 'Effects of Impactor Geometry on Pultruded Composites Under Low-Velocity Impact Loading', in Ilki A; Ispir M; Inci P (eds.), Lecture Notes in Civil Engineering, Springer Nature, Istanbul, Turkey, pp. 801 - 808, presented at 10th International Conference on FRP Composites in Civil Engineering, Istanbul, Turkey, 08 December 2021 - 10 December 2021,
    Conference Papers | 2019
    Li Z; Wang H; Aryal B; Hazell P; Khennane A; Shankar K; Escobedo-Diaz J, 2019, 'Effects of impactor mass on pultruded profiles subjected to low-velocity impacts', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Cape Town, South Africa, presented at 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02 September 2019 - 04 September 2019,
    Conference Papers | 2019
    Li Z; Wang H; Aryal B; Hazell PJ; Khennane A; Shankar K; Escobedo-Diaz JP, 2019, 'Effects of impactor mass on pultruded profiles subjected to low-velocity impacts', Taylor & Francis, pp. 623 - 627,
    Conference Papers | 2019
    Pathak S; Khennane A; Al-Deen S, 2019, 'SEISMIC COLLAPSE RISK ASSESSMENT USING A POWER BASED PERFORMANCE INDICATOR', in 5th International Conference On Earthquake Engineering And Seismology, METU, Ankara, Turkey, presented at 5th International Conference On Earthquake Engineering And Seismology, METU, Ankara, Turkey, 08 October 2019 - 11 October 2019,
    Conference Papers | 2019
    Pathak S; Watt S; Khennane A; Al-Deen S, 2019, 'Evaluation of P-Delta instability in hardening oscillators using dynamical systems approach', in El Sawah, S. (ed.) MODSIM2019, 23rd International Congress on Modelling and Simulation., Modelling and Simulation Society of Australia and New Zealand, Canberra, pp. 137 - 143, presented at 23rd International Congress on Modelling and Simulation (MODSIM2019), Canberra, 01 December 2019,
    Conference Papers | 2018
    Khennane A; Tekle B; Kayali O, 2018, 'Parametric Study on Bond of GFRP Bars in Alkali Activated Cement Concrete', in FERRIER E; BENZARTI K; CARON J-F (eds.), 9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2018), PARIS 17-19 JULY 2018, Institute of Civil Engineers (ICE) publishing, PARIS, pp. 811 - 819, presented at 9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2018),, PARIS, 17 July 2018 - 19 July 2018,
    Conference Papers | 2018
    Pathak S; Al-Deen S; Khennane A, 2018, 'Stochastic analysis of structural collapse based on extended energy method approach', in Australian Structural Engineering Conference: ASEC 2018, Engineers Australia, Adelaide, Australia, presented at Australian Structural Engineering Conference: ASEC 2018, Adelaide, Australia, 25 September 2018 - 28 September 2018,
    Conference Papers | 2017
    Khennane A; Tekle B; Kayali O, 2017, 'Bond Behavior of GFRP reinforced geopolymer cement concrete', in Shanableh A; Maalej M; Barakat S; Omar ; Al-Toubat S; Al-Ruzouq R; Hamad K (eds.), MATEC Web of Conferences, The University of Sharjah, Sharjah, United Arab Emirates, presented at International Conference on Advances in Sustainable Construction Materials & Civil Engineering Systems (ASCMCES-17), Sharjah, United Arab Emirates, 17 April 2017 - 20 April 2017,
    Conference Papers | 2017
    Li Z; Khennane A; Hazell PJ; Remennikov A, 2017, 'Numerical modeling of a hybrid GFRP-concrete beam subjected to low-velocity impact loading', in Liu GR; Xu H; Zirui L (eds.), International Conference on Computational Methods Full Paper Proceedings, Scientech Publisher LLC, USA, Guilin, Guangxi, China, pp. 768 - 776, presented at The 8th international conference on computational methods, Guilin, Guangxi, China, 25 July 2017 - 29 July 2017,
    Conference Papers | 2017
    Pathak S; Khennane A; Al-Deen S, 2017, 'Energy Formulation for Seismic Collapse Assessment of RCC Structures: Improvements in Performance Design', Canberra, Australia, presented at Australian Earthquake Engineering Society 2017 Conference, Canberra, Australia, 24 November 2017 - 26 November 2017,
    Conference Papers | 2016
    Khennane A; Kayali O; Junaid M, 2016, 'Stress-Strain Behaviour of Alkali Activated Fly-Ash Concrete at Elevated Temperatures', in Schmidt W; Msinjili S (ed.), Advances in Cement and Concrete Technology in Africa. Proceedings 2nd International Conference Dar es Salaam, Tanzania January 27 -29 2016, Dar es Salaam, Tanzania, presented at Advances in Cement and Concrete Technology in Africa, Dar es Salaam, Tanzania, 27 January 2016 - 29 January 2016
    Conference Papers | 2016
    Tekle BH; Cui Y; Khennane A; Kayali O, 2016, 'Comparison of bond properties of steel and sand-coated GFRP bars in fly Ash-based geopolymer concrete', in Proceedings of the 8th International Conference on Fibre Reinforced Polymer Frp Composites in Civil Engineering Cice 2016, pp. 122 - 128
    Conference Papers | 2015
    Khennane A; Tekle BH; Kayali O, 2015, 'Bond properties of glass fibre reinforced polymer bars with fly-ash based geopolymer concrete', Lisbon, Portugal, presented at 10th International Conference on Composite Science and Technology, ICCST/10, Lisbon, Portugal, 02 September 2015 - 04 September 2015
    Conference Papers | 2015
    Khennane A; tekle BH; kayali O, 2015, 'Finite element modelling of bond behaviour of glass fibre reinforced polymer bars with fly-ash based geopolymer concrete', Brisbane, Australia, presented at The 2nd Australasian Conference on Computational Mechanics (ACCM2015), Brisbane, Australia, 30 November 2015 - 01 December 2015
    Conference Papers | 2015
    Sadaoui A; Lattari K; Khennane A, 2015, 'Response of rc columns with transient creep in a natural fire environment', in Coupled Problems 2015 Proceedings of the 6th International Conference on Coupled Problems in Science and Engineering, pp. 1312 - 1323
    Conference Presentations | 2015
    Yu YUGUO; Khennane AMAR; Zhang YX, 2015, 'Numerical modelling of degradation of cement paste under external sulfate attack', presented at the 2nd Australiasian Conference on Computational Mechanics (ACCM2015), Brisbane, Australia, 30 November 2015 - 01 December 2015
    Conference Papers | 2014
    Junaid MT; Khennane A; Kayali O, 2014, 'Investigation into the effect of the duration of exposure on the behaviour of GPC at elevated temperatures', in Matec Web of Conferences,
    Conference Papers | 2014
    Sadaoui A; Khennane A; Fafard M, 2014, 'Fire resistance analysis of RC elements with restrained thermal elongation in a natural fire', in Computational Modelling of Concrete Structures Proceedings of Euro C 2014, pp. 603 - 608,
    Conference Papers | 2013
    Ferdous MW; Kayali O; Khennane A, 2013, 'A detailed procedure of mix design for fly ash based geopolymer concrete', in Proceedings of the 4th Asia Pacific Conference on Frp in Structures Apfis 2013
    Conference Papers | 2013
    Ferdous MW; Khennane A; Kayali O, 2013, 'Hybrid FRP-concrete railway sleeper', in Advanced Composites in Construction 2013, ACIC 2013 - Conference Proceedings, Belfast, UK, pp. 67 - 77, presented at Advanced Composites in Construction 2013, ACIC 2013 - Conference Proceedings, Belfast, UK, 10 September 2013 - 12 September 2013
    Conference Papers | 2013
    Islam SMS; Khennane A, 2013, 'An optimized nonlinear finite element design for continuous RC deep beams', in Isec 2013 7th International Structural Engineering and Construction Conference New Developments in Structural Engineering and Construction, pp. 403 - 408,
    Conference Papers | 2013
    Sadaoui A; Illouli S; Khennane A, 2013, 'Effect of restraints on the response of RC columns in a parametric fire', in Proceedings of the 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS 2013, Toledo; Spain, pp. 735 - 744, presented at 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS 2013, Toledo; Spain, 11 March 2013 - 14 March 2013
    Conference Papers | 2013
    Shahidul Islam SM; Khennane A, 2013, 'An Optimized Nonlinear Finite Element Design For Continuous Rc Deep Beams', in Proceedings of the New Developments in Structural Engineering and Construction, Research Publishing Services, pp. 403 - 408, presented at The Seventh International Structural Engineering and Construction Conference, - 23 June 2013,
    Conference Papers | 2012
    Chakrabortty A; Khennane A, 2012, 'EFFECT OF CONFINEMENT ON THE BEHAVIOUR OF HYBRID FRP-CONCRETE BEAMS', in Proceedings: IIFC Official Conferences, CICE 2012, Rome, Italy, 13-15 June 2012, IIFC International Institute for FRP in Construction, Web, presented at CICE2012 Composites in Civil Engineering, Rome, 13 June 2012 - 15 June 2012,
    Conference Papers | 2012
    Chakrabortty A; Khennane A, 2012, 'Effect of concrete block thickness on the behavior of hybrid FRP concrete beams', in ACUN6 Conference proceedings, Monash University 黑料网大事记, Australia, pp. 71 - 76, presented at ACUN 6 Composites & Nanocomposites in Civil, Offshore and Mining Infrastructure, Melbourne, 14 November 2012 - 16 November 2012,
    Conference Papers | 2012
    Islam SMS; Khennane A, 2012, 'Experimental Varification of Automated Design for the Reinforcement in Deep Beams with Openings', in Research, Development and Practice in Structural Engineering and Construction, Research Publishing Services, pp. 303 - 308, presented at Research, Development and Practice in Structural Engineering and Construction, 28 November 2012 - 02 December 2012,
    Conference Papers | 2012
    Junaid MT; Kayali O; Khennane A, 2012, 'Mix Design Procedure for Alkali Activated Fly Ash-Based Geopolymer Concretes', in 2012 International Conference on Engineering and Applied Science, Beijing, China, pp. 139 - 152, presented at ICEAS 2012 : International Conference on Engineering and Applied Science, Beijing, China, 24 July 2012 - 27 July 2012
    Conference Papers | 2011
    Islam S; Khennane A, 2011, 'An optimized nonlinear finite element design for reinforced concrete deep beams', in Modern methods and advances in Structural Engineering and Construction,, Research Publishing, Singapore, pp. 729 - 734, presented at ISEC-6 Conference, Zurich, Switzerland, 21 June 2011 - 26 June 2011,
    Conference Papers | 2011
    Islam SMS; Khennane A, 2011, 'An Optimized Nonlinear Finite Element Design for Reinforced Concrete Deep Beams', in Modern Methods and Advances in Structural Engineering and Construction(ISEC-6), Research Publishing Services, pp. 729 - 734, presented at Modern Methods and Advances in Structural Engineering and Construction, 21 June 2011 - 26 June 2011,
    Conference Papers | 2010
    Chakrabortty A; Khennane A; Morozov EV, 2010, 'An Experimental Investigation into the Behaviour of Filament Wound Hybrid FRP-Concrete Beam', in Advances in FRP Composites in Civil Engineering, Tsinghua University Press, Beijing, China, presented at 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, 27 September 2010 - 29 September 2010,
    Conference Papers | 2010
    Leo B; Chakrabortty A; Khennane A, 2010, 'A Design Concept for an All Composte Road Bridge', in Advances in FRP Composites in Civil Engineering, Tsinghua University Press, Beijing, China, presented at 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, 27 September 2010 - 29 September 2010,
    Conference Papers | 2009
    Khennane A; Heslehurst RB, 2009, 'A New Design Approach for a Hybrid FRP-Concrete Beam', Gold Coast, presented at Composites Australia Conference and Exhibition 2009, Gold Coast, 12 March 2009 - 13 March 2009,
    Conference Papers | 2008
    Khennane A, 2008, 'A new design concept for a hybrid beam FRP-High strength concrete beam for infrastructure applications', in FRP Composities in Civil Engineering, Zurich, Switzerland, presented at CICE 2008, FRP Composities in Civil Engineering, Zurich, Switzerland, 22 July 2008 - 24 July 2008
    Conference Papers | 2007
    Khennane A; Tran-Cong T, 2007, 'Timoshenko beam-solution in terms of integrated radial basis functions', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
    Conference Presentations | 2006
    Hieu NV; Khennane A; Tran-Cong T, 2006, 'Monte-Carlo simulation of the durability of glass fibre reinforced composite under environmental stress corrosion', presented at International Conference on Nonlinear Analysis & Engineering Mechanics Today, Institute of Applied Mechanics, Vietnamese Academy of Science and Technology, Vietnam, 11 December 2006 - 14 December 2006
    Conference Papers | 2006
    Khennane A; Melchers R; Andersons J, 2006, 'A stress corrosion cracking model for glass fibres based on statistical distribution of surface flaws', Biarritz, France, presented at 12th European Conference on Composite Materials, Biarritz, France, 29 August 2006 - 01 September 2006
    Conference Papers | 2005
    Khennane A; Melchers R, 2005, 'A meso-scale finite element model for environmental stress corrosion of GFRP', in Proceedings of the fourth Australasian Congress on Applied Mechanics, Australasian Congress on Applied Mechanics, Melbourne, Victoria, presented at 4th Australasian Congress on Applied Mechanics, Melbourne, 16 February 2005 - 18 February 2005
    Conference Presentations | 2003
    Sadaoui A; Khennane A; Kaci S, 2003, 'Nonlinear Analysis of Reinforced Concrete Beams in a Fire Environment', presented at Extreme Loading Conference, XL2003, Toronto, Canada, 06 August 2003
    Preprints |
    Katoozi E; Liow J-L; Khennane A, Direct Colorimetric Measurement of Copper with Sodium Diethyldithiocarbamate as the Reagent in the Presence of Ferric Ions,