Dr Ondrej Muransky

Back to

I obtained my PhD degree at Charles University in Prague (Czech Republic), Faculty of Mathematics and Physics in the field of Physics of Condensed Matter and Material Research. I work at the Australian Nuclear Science and Technology Organisation (ANSTO) as a senior researcher and a numerical analyst, where I lead a research group focused on the High-Temperature and Molten-Salt Corrosion Performance of Advanced Materials for applications in the future low-emission energy-generation and energy-storage systems. In my work I use experimental and numerical techniques to obtain experimental (neutron, synchrotron) and numerical (finite element, crystal plasticity) data to understand in-service performance of materials. I have over ten years of post-PhD experience working on multi-disciplinary international research, industrial and defence related projects requiring experimental as well as numerical modelling expertise in the field of material research & engineering, manufacturing, solid mechanics, and advanced data analysis. I also hold an Adjunct Associate Professor position at the University of New South Wales (��¼�) where I supervise and train undergraduate and post-graduate students.

Phone

+ 61 2 9717 3488

E-mail

ondrej.muransky@ansto.gov.au

Location

Room 1049, Bld.3 ANSTO Lucas Heights New Illawara Road Sydney, NSW, Australia

Book Chapters | 2021

Futterer MA; Strydom G; Sato H; Li F; Abonneau E; Abram T; Davies MW; Kim M; Edwards L; Muransky O; Pouchon MA; Yetisir M, 2021, 'The high temperature gas-cooled reactor', in Encyclopedia of Nuclear Energy, pp. 512 - 522
Journal articles | 2024

Qiu Z; Zhu H; Wang Z; Muránsky O; Wei T; Budzakoska-Testone E; Davis J; Studer A; Gu Q; Garbe U; Wexler D; Li H, 2024, 'Crystallographic texture and multiscale boundaries mediated creep anisotropy in additively manufactured Ni-based Hastelloy C276 superalloy', Additive Manufacturing, 83,

Journal articles | 2023

Avila Molina J; Muránsky O; Bortolan Neto L; Kruzic JJ; Wright RN, 2023, 'Development and performance of data-driven models for the prediction of the high-temperature fatigue life of alloy 617', International Journal of Pressure Vessels and Piping, 206,

Journal articles | 2023

Reiner J; Narain D; Zhang P; Flores-Johnson EA; Muransky O, 2023, 'Progressive fracture testing of Carbon–Carbon composites', Ceramics International, 49, pp. 6451 - 6458,

Journal articles | 2022

Akrivos V; Muransky O; Depradeux L; Smith MC; Vasileiou A; Deaconu V; Kapadia P, 2022, 'On the Accurate Prediction of Residual Stress in a Three‐Pass Slot Nickel‐Base Repair Weld by Numerical Simulations', Journal of Manufacturing and Materials Processing, 6,

Journal articles | 2022

Chen L; Wang Z; Zhu H; Burr PA; Qu J; Huang Y; Balogh L; Preuss M; Muránsky O; Muransky O, 2022, 'On the microstructure and high-temperature stability of nano-grained Zircaloy-4', Scripta Materialia, 210, pp. 114410,

Journal articles | 2022

Choi J; Bortolan Neto L; Wright RN; Kruzic JJ; Muránsky O; Muransky O, 2022, 'On the prediction of creep behaviour of alloy 617 using Kachanov-Rabotnov model coupled with multi-objective genetic algorithm optimisation', International Journal of Pressure Vessels and Piping, 199, pp. 104721,

Journal articles | 2022

Dobroň P; Drozdenko D; Maric M; Muránsky O, 2022, 'On the plasticity of a hot-rolled Zircolay-4 via a combination of in-situ acoustic emission and ex-situ EBSD techniques', Materials Science and Engineering A, 852,

Journal articles | 2022

Dong B; Wang Z; Zhu H; Muránsky O; Qiu Z; Shen C; Pan Z; Li H, 2022, 'Low neutron cross-section FeCrVTiNi based high-entropy alloys: design, additive manufacturing and characterization', Microstructures, 2,

Journal articles | 2022

Wang Z; Muránsky O; Zhu H; Wei T; Zhang Z; Ionescu M; Yang C; Davis J; Hu G; Munroe P; Windes W, 2022, 'Impact of pre-existing crystal lattice defects on the accumulation of irradiation-induced damage in a C/C composite', Journal of Nuclear Materials, 564,

Journal articles | 2022

Wu B; Qiu Z; Dong B; Muránsky O; Zhu H; Wang Z; Pan Z; Li H, 2022, 'Microstructural characterisation and hardness assessment of wire arc cladded Hastelloy C276 on creep resistant steel P91', Journal of Materials Research and Technology, 19, pp. 3818 - 3827,

Journal articles | 2022

Zhang C; Qiu Z; Zhu H; Wang Z; Muránsky O; Ionescu M; Pan Z; Xi J; Li H, 2022, 'On the effect of heat input and interpass temperature on the performance of inconel 625 alloy deposited using wire arc additive manufacturing–cold metal transfer process', Metals, 12,

Journal articles | 2022

Zhou D; Bu Y; Muránsky O; Geng H; Sun B; Yang C; Zhang D, 2022, 'Annealing-induced strengthening and stabilization in ultrafine-grained Al and Al–Mg alloys prepared by rapid powder consolidation', Materials Science and Engineering A, 833,

Journal articles | 2021

Achouri A; Hosseinzadeh F; Bouchard PJ; Paddea S; Muransky O, 2021, 'The incremental contour method using asymmetric stiffness cuts', Materials and Design, 197,

Journal articles | 2021

Danon AE; Muránsky O; Zhu H; Wei T; Flores-Johnson EA; Li ZJ; Kruzic JJ; Muransky O; Flores Johnson EA, 2021, 'The effect of microstructure and welding-induced plasticity on the strength of Ni–Mo–Cr alloy welds', Materialia, 17, pp. 101126,

Journal articles | 2021

Dong B; Wang Z; Pan Z; Muránsky O; Shen C; Reid M; Wu B; Chen X; Li H, 2021, 'On the development of pseudo-eutectic AlCoCrFeNi2.1 high entropy alloy using Powder-bed Arc Additive Manufacturing (PAAM) process', Materials Science and Engineering A, 802,

Journal articles | 2021

Huang H; Liu J; Lei G; Muránsky O; Wei T; Ionescu M, 2021, 'Effect of tellurium (Te4+) irradiation on microstructure and associated irradiation-induced hardening', Chinese Physics B, 30,

Journal articles | 2021

Lee M; Muránsky O; Karatchevtseva I; Huang H; Laws KJ, 2021, 'Corrosion performance of Ni-based structural alloys for applications in molten-salt based energy systems: Experiment & numerical validation', Corrosion Science, 190,

Journal articles | 2021

Qiu Z; Wu B; Wang Z; Wexler D; Carpenter K; Zhu H; Muránsky O; Zhang J; Li H, 2021, 'Effects of post heat treatment on the microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy', Materials Characterization, 177,

Journal articles | 2021

Zhu H; Muránsky O; Wei T; Davis J; Budzakoska-Testone E; Huang H; Drew M, 2021, 'The effect of applied stress on the high-temperature creep behaviour and microstructure of NiMoCr Hastelloy-N® alloy', Materialia, 16,

Journal articles | 2021

Zhu H; Wang Z; Muránsky O; Davis J; Yu S; Kent D; Wang G; Dargusch MS, 2021, 'The characterisation and formation of novel microstructural features in a Ti−Nb−Zr−Mo−Sn alloy manufactured by Laser Engineered Net Shaping (LENS)', Additive Manufacturing, 37,

Journal articles | 2021

Zhu Z; Huang H; Muránsky O; Liu J; Zhu Z; Huang Y, 2021, 'On the irradiation tolerance of nano-grained Ni–Mo–Cr alloy: 1 MeV He+ irradiation experiment', Journal of Nuclear Materials, 544,

Journal articles | 2020

Akrivos V; Wimpory RC; Hofmann M; Stewart B; Muransky O; Smith MC; Bouchard J, 2020, 'Neutron diffraction measurements of weld residual stresses in three-pass slot weld (Alloy 600/82) and assessment of the measurement uncertainty', Journal of Applied Crystallography, 53, pp. 1181 - 1194,

Journal articles | 2020

Best JP; Ostergaard HE; Li B; Stolpe M; Yang F; Nomoto K; Hasib MT; Muránsky O; Busch R; Li X; Kruzic JJ; Muransky O, 2020, 'Fracture and fatigue behaviour of a laser additive manufactured Zr-based bulk metallic glass', Additive Manufacturing, 36, pp. 101416,

Journal articles | 2020

Danon AE; Muránsky O; Karatchevtseva I; Zhang Z; Li ZJ; Scales N; Kruzic JJ; Edwards L; Muransky O, 2020, 'Molten salt corrosion (FLiNaK) of a Ni–Mo–Cr alloy and its welds for application in energy-generation and energy-storage systems', Corrosion Science, 164, pp. 108306,

Journal articles | 2020

Douzian G; Muránsky O; Kruzic JJ; Wright RN; Payten W; Muransky O, 2020, 'Assessment of modelling methodologies for prediction of high-temperature creep-fatigue behaviour of Alloy 617', International Journal of Pressure Vessels and Piping, 187, pp. 104150,

Journal articles | 2020

Huang Q; Shi R; Muránsky O; Beladi H; Kabra S; Schimpf C; Volkova O; Biermann H; Mola J, 2020, 'Author Correction: Neutron diffraction analysis of stress and strain partitioning in a two-phase microstructure with parallel-aligned phases (Scientific Reports, (2020), 10, 1, (13536), 10.1038/s41598-020-70299-1)', Scientific Reports, 10,

Journal articles | 2020

Huang Q; Shi R; Muránsky O; Beladi H; Kabra S; Schimpf C; Volkova O; Biermann H; Mola J, 2020, 'Neutron diffraction analysis of stress and strain partitioning in a two-phase microstructure with parallel-aligned phases', Scientific Reports, 10,

Journal articles | 2020

Muránsky O; Karatchevtseva I; Danon AE; Holmes R; Huai P; Zhang Z, 2020, 'Impact of dislocations and dislocation substructures on molten salt corrosion of alloys under plasticity-imparting conditions', Corrosion Science, 176,

Journal articles | 2020

Muránsky O; Zhu H; Lim SL; Short K; Cairney J; Drew M, 2020, 'On the evolution of mechanical properties and microstructure of ferritic-bainitic (FB) 2.25Cr-1Mo (Grade 22) steel during high-temperature creep', Materialia, 9,

Journal articles | 2020

Qiu Z; Wu B; Zhu H; Wang Z; Hellier A; Ma Y; Li H; Muransky O; Wexler D, 2020, 'Microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy', Materials and Design, 195,

Journal articles | 2020

Smith H; Linke BS; Muránsky O; Hamelin C; Hill MR, 2020, 'Assessment of mechanical properties and microstructure characterizing techniques in their ability to quantify amount of cold work in 316l alloy', Journal of Engineering Materials and Technology, Transactions of the ASME, 142,

Journal articles | 2020

Wang H; Geng H; Zhou D; Niitsu K; Muránsky O; Zhang D, 2020, 'Multiple strengthening mechanisms in high strength ultrafine-grained Al–Mg alloys', Materials Science and Engineering A, 771,

Journal articles | 2020

Wang Z; Muránsky O; Zhu H; Wei T; Sokolova A; Short K; Wright RN, 2020, 'On the kinetics of gamma prime (γ’) precipitation and its strengthening mechanism in Alloy 617 during a long-term thermal aging', Materialia, 11,

Journal articles | 2019

Kan K; Muránsky O; Bendeich PJ; Wright RN; Kruzic JJ; Payten W; Muransky O, 2019, 'Assessment of creep damage models in the prediction of high-temperature creep behaviour of Alloy 617', International Journal of Pressure Vessels and Piping, 177, pp. 103974,

Journal articles | 2019

Murphy GL; Wang CH; Zhang Z; Kowalski PM; Beridze G; Avdeev M; Muransky O; Brand HEA; Gu QF; Kennedy BJ, 2019, 'Controlling Oxygen Defect Formation and Its Effect on Reversible Symmetry Lowering and Disorder-to-Order Phase Transformations in Nonstoichiometric Ternary Uranium Oxides', Inorganic Chemistry, 58, pp. 6143 - 6154,

Journal articles | 2019

Muránsky O; Balogh L; Tran M; Hamelin CJ; Park JS; Daymond MR, 2019, 'On the measurement of dislocations and dislocation substructures using EBSD and HRSD techniques', Acta Materialia, 175, pp. 297 - 313,

Journal articles | 2019

Muránsky O; Yang C; Zhu H; Karatchevtseva I; Sláma P; Nový Z; Edwards L, 2019, 'Molten salt corrosion of Ni-Mo-Cr candidate structural materials for Molten Salt Reactor (MSR) systems', Corrosion Science, 159,

Journal articles | 2019

Sarvghad M; Muránsky O; Steinberg TA; Hester J; Hill MR; Will G, 2019, 'On the effect of cold-rolling on the corrosion of SS316L alloy in a molten carbonate salt', Solar Energy Materials and Solar Cells, 202,

Journal articles | 2019

Smith MC; Muránsky O; Xiong Q; Bouchard PJ; Mathew J; Austin C, 2019, 'Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 1: Mock-up manufacture, residual stress measurements, and materials characterisation', International Journal of Pressure Vessels and Piping, 172, pp. 233 - 250,

Journal articles | 2019

Tremsin AS; Sokolova AV; Salvemini F; Luzin V; Paradowska A; Muransky O; Kirkwood HJ; Abbey B; Wensrich CM; Kisi EH, 2019, 'Energy-resolved neutron imaging options at a small angle neutron scattering instrument at the Australian Center for Neutron Scattering', Review of Scientific Instruments, 90,

Journal articles | 2019

Xiong Q; Smith MC; Muransky O; Mathew J, 2019, 'Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 2: Modelling and validation', International Journal of Pressure Vessels and Piping, 172, pp. 430 - 448,

Journal articles | 2019

Zhou D; Wang H; Muránsky O; Kong C; Yang C; Zhang D, 2019, 'On the Formation of Nanoscale Intergranular Intermetallic Compound Films in a Cu-5 at. pct Zr Alloy', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 50, pp. 4569 - 4581,

Journal articles | 2019

Zhou D; Wang H; Saxey DW; Muránsky O; Geng H; Rickard WDA; Quadir Z; Yang C; Reddy SM; Zhang D, 2019, 'Hall–Petch Slope in Ultrafine Grained Al-Mg Alloys', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 50, pp. 4047 - 4057,

Journal articles | 2018

Kirkwood HJ; de Jonge MD; Muránsky O; Hofmann F; Howard DL; Ryan CG; van Riessen G; Rowles MR; Paradowska AM; Abbey B, 2018, 'Simultaneous X-ray diffraction, crystallography and fluorescence mapping using the Maia detector', Acta Materialia, 144, pp. 1 - 10,

Journal articles | 2018

Maric M; Muránsky O; Karatchevtseva I; Ungár T; Hester J; Studer A; Scales N; Ribárik G; Primig S; Hill MR; Muransky O, 2018, 'The effect of cold-rolling on the microstructure and corrosion behaviour of 316L alloy in FLiNaK molten salt', Corrosion Science, 142, pp. 133 - 144,

Journal articles | 2018

Muránsky O; Hamelin CJ; Hosseinzadeh F; Prime MB, 2018, 'Evaluation of a self-equilibrium cutting strategy for the contour method of residual stress measurement', International Journal of Pressure Vessels and Piping, 164, pp. 22 - 31,

Journal articles | 2018

Muránsky O; Hosseinzadeh F; Hamelin CJ; Traore Y; Bendeich PJ, 2018, 'Investigating optimal cutting configurations for the contour method of weld residual stress measurement', International Journal of Pressure Vessels and Piping, 164, pp. 55 - 67,

Journal articles | 2018

Muránsky O; Tran M; Hamelin CJ; Shrestha SL; Bhattacharyya D, 2018, 'Assessment of welding-induced plasticity via electron backscatter diffraction', International Journal of Pressure Vessels and Piping, 164, pp. 32 - 38,

Journal articles | 2018

Smith MC; Muránsky O; Austin C; Bendeich P; Xiong Q, 2018, 'Optimised modelling of AISI 316L(N) material behaviour in the NeT TG4 international weld simulation and measurement benchmark', International Journal of Pressure Vessels and Piping, 164, pp. 93 - 108,

Journal articles | 2018

Yang C; Muránsky O; Zhu H; Karatchevtseva I; Holmes R; Avdeev M; Jia Y; Huang H; Zhou X, 2018, 'Corrosion performance of Ni-16%wt.Mo-X%wt.SiC alloys in FLiNaK molten salt', Corrosion Science, 143, pp. 240 - 248,

Journal articles | 2018

Yang C; Wei T; Muránsky O; Carr D; Huang H; Zhou X, 2018, 'The effect of ball-milling time and annealing temperature on fracture toughness of Ni-3 wt.% SiC using small punch testing', Materials Characterization, 138, pp. 289 - 295,

Journal articles | 2018

Zhou D; Wang X; Muránsky O; Wang X; Xie Y; Yang C; Zhang D, 2018, 'Heterogeneous microstructure of an Al2O3 dispersion strengthened Cu by spark plasma sintering and extrusion and its effect on tensile properties and electrical conductivity', Materials Science and Engineering A, 730, pp. 328 - 335,

Journal articles | 2017

Li L; Muránsky O; Flores-Johnson EA; Kabra S; Shen L; Proust G, 2017, 'Effects of strain rate on the microstructure evolution and mechanical response of magnesium alloy AZ31', Materials Science and Engineering A, 684, pp. 37 - 46,

Journal articles | 2017

Yang C; Muránsky O; Zhu H; Thorogood GJ; Avdeev M; Huang H; Zhou X; Muransky O, 2017, 'The effect of milling time on the microstructural characteristics and strengthening mechanisms of NiMo-SiC Alloys prepared via powder metallurgy', Materials, 10, pp. 389,

Journal articles | 2017

Yang C; Muránsky O; Zhu H; Thorogood GJ; Huang H; Zhou X, 2017, 'On the origin of strengthening mechanisms in Ni-Mo alloys prepared via powder metallurgy', Materials and Design, 113, pp. 223 - 231,

Journal articles | 2016

Hosseinzadeh F; Traore Y; Bouchard PJ; Muránsky O, 2016, 'Mitigating cutting-induced plasticity in the contour method, part 1: Experimental', International Journal of Solids and Structures, 94-95, pp. 247 - 253,

Journal articles | 2016

Muránsky O; Hamelin CJ; Hosseinzadeh F; Prime MB, 2016, 'Mitigating cutting-induced plasticity in the contour method. Part 2: Numerical analysis', International Journal of Solids and Structures, 94-95, pp. 254 - 262,

Journal articles | 2015

Muránsky O; Hamelin CJ; Patel VI; Luzin V; Braham C, 2015, 'The influence of constitutive material models on accumulated plastic strain in finite element weld analyses', International Journal of Solids and Structures, 69-70, pp. 518 - 530,

Journal articles | 2015

Olson MD; Hill MR; Patel VI; Muránsky O; Sisneros T, 2015, 'Measured biaxial residual stress maps in a stainless steel weld', Journal of Nuclear Engineering and Radiation Science, 1,

Journal articles | 2015

Olson MD; Hill MR; Willis E; Peterson AG; Patel VI; Muránsky O, 2015, 'Assessment of weld residual stress measurement precision: Mock-up design and results for the contour method', Journal of Nuclear Engineering and Radiation Science, 1,

Journal articles | 2014

Hamelin CJ; Muránsky O; Smith MC; Holden TM; Luzin V; Bendeich PJ; Edwards L, 2014, 'Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments', Acta Materialia, 75, pp. 1 - 19,

Journal articles | 2014

Muránsky O; Smith MC; Bendeich PJ; Hosseinzadeh F; Edwards L, 2014, 'Numerical analysis of retained residual stresses in C(T) specimen extracted from a multi-pass austenitic weld and their effect on crack growth', Engineering Fracture Mechanics, 126, pp. 40 - 53,

Journal articles | 2013

Muránsky O; Daymond MR; Bhattacharyya D; Zanellato O; Vogel SC; Edwards L, 2013, 'Load partitioning and evidence of deformation twinning in dual-phase fine-grained Zr-2.5%Nb alloy', Materials Science and Engineering A, 564, pp. 548 - 558,

Journal articles | 2013

Muránsky O; Holden TM; Kirstein O; James JA; Paradowska AM; Edwards L, 2013, 'Evaluation of residual stresses in electron-beam welded Zr2.5Nb0.9Hf Zircadyne flange mock-up of a reflector vessel beam tube flange', Journal of Nuclear Materials, 438, pp. 154 - 162,

Journal articles | 2012

Bendeich PJ; Muránsky O; Hamelin CJ; Smith MC; Edwards L, 2012, 'Validated numerical analysis of residual stresses in safety relief valve (SRV) nozzle mock-ups: Influence of axial restraint on distortion and residual stress predictions', Computational Materials Science, 62, pp. 285 - 288,

Journal articles | 2012

Flores-Johnson EA; Muránsky O; Hamelin CJ; Bendeich PJ; Edwards L, 2012, 'Numerical analysis of the effect of weld-induced residual stress and plastic damage on the ballistic performance of welded steel plate', Computational Materials Science, 58, pp. 131 - 139,

Journal articles | 2012

Muránsky O; Hamelin CJ; Smith MC; Bendeich PJ; Edwards L, 2012, 'The effect of plasticity theory on predicted residual stress fields in numerical weld analyses', Computational Materials Science, 54, pp. 125 - 134,

Journal articles | 2012

Muránsky O; Smith MC; Bendeich PJ; Holden TM; Luzin V; Martins RV; Edwards L, 2012, 'Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements', International Journal of Solids and Structures, 49, pp. 1045 - 1062,

Journal articles | 2011

Muránsky O; Smith MC; Bendeich PJ; Edwards L, 2011, 'Validated numerical analysis of residual stresses in Safety Relief Valve (SRV) nozzle mock-ups', Computational Materials Science, 50, pp. 2203 - 2215,

Journal articles | 2010

Muránsky O; Barnett MR; Carr DG; Vogel SC; Oliver EC, 2010, 'Investigation of deformation twinning in a fine-grained and coarse-grained ZM20 Mg alloy: Combined in situ neutron diffraction and acoustic emission', Acta Materialia, 58, pp. 1503 - 1517,

Journal articles | 2010

Muránsky O; Barnett MR; Luzin V; Vogel S, 2010, 'On the correlation between deformation twinning and Lüders-like deformation in an extruded Mg alloy: In situ neutron diffraction and EPSC.4 modelling', Materials Science and Engineering A, 527, pp. 1383 - 1394,

Journal articles | 2009

Muránsky O; Carr DG; Šittner P; Oliver EC, 2009, 'In situ neutron diffraction investigation of deformation twinning and pseudoelastic-like behaviour of extruded AZ31 magnesium alloy', International Journal of Plasticity, 25, pp. 1107 - 1127,

Journal articles | 2008

Muránsky O; Carr DG; Barnett MR; Oliver EC; Šittner P, 2008, 'Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: In situ neutron diffraction and EPSC modelling', Materials Science and Engineering A, 496, pp. 14 - 24,

Journal articles | 2008

Muránsky O; Šittner P; Zrník J; Oliver EC, 2008, 'In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP-assisted steels at room and elevated temperatures', Acta Materialia, 56, pp. 3367 - 3379,

Journal articles | 2008

Zrnik J; Muransky O; Stejskal O; Lukáš P; Hornak P, 2008, 'Effect of processing conditions on structure development and mechanical response of Si-Mn 'TRIP' steel', Materials Science and Engineering A, 483-484, pp. 71 - 75,

Journal articles | 2006

Jenčuš P; Polák J; Lukáš P; Muránsky O, 2006, 'In situ neutron diffraction study of the low cycle fatigue of the α-γ duplex stainless steel', Physica B Condensed Matter, 385-386 I, pp. 597 - 599,

Journal articles | 2006

Koo MS; Xu PG; Li JH; Tomota Y; Muransky O; Lukas P; Adachi Y, 2006, 'In situ neutron diffraction during thermo-mechanically controlled process in low alloy steels', Solid State Phenomena, 118, pp. 419 - 424,

Journal articles | 2006

Muránsky O; Lukáš P; Zrník J; Šittner P, 2006, 'Neutron diffraction analysis of retained austenite stability in Mn-Si steel during plastic deformation', Physica B Condensed Matter, 385-386 I, pp. 587 - 589,

Journal articles | 2006

Xu PG; Tomota Y; Lukáš P; Muránsky O; Adachi Y, 2006, 'Austenite-to-ferrite transformation in low alloy steels during thermomechanically controlled process studied by in situ neutron diffraction', Materials Science and Engineering A, 435-436, pp. 46 - 53,

Journal articles | 2006

Zrnik J; Mamuzić I; Lukaš P; Muransky O; Jenčuš P; Novy Z, 2006, 'Design of thermo mechanical processing and transformation behaviour of bulk Si-Mn trip steel', Metalurgija, 45, pp. 85 - 91

Journal articles | 2006

Zrník J; Muránsky O; Lukáš P; Nový Z; Sittner P; Horňak P, 2006, 'Retained austenite stability investigation in TRIP steel using neutron diffraction', Materials Science and Engineering A, 437, pp. 114 - 119,

Journal articles | 2004

Zrnik J; Strunz P; Vrchovinsky V; Muransky O; Hornak P; Wiedenmann A, 2004, 'Creep deformation and microstructural examination of a prior thermally exposed nickel base superalloy', Key Engineering Materials, 274-276, pp. 925 - 930,

Journal articles | 2004

Zrnik J; Strunz P; Vrchovinsky V; Muransky O; Novy Z; Wiedenmann A, 2004, 'Degradation of creep properties in a long-term thermally exposed nickel base superalloy', Materials Science and Engineering A, 387-389, pp. 728 - 733,
Conference Papers | 2024

Flores-Johnson EA; Irman K; Townsend J; Yang C; Al-Hilfi S; Didugu S; Reiner J; Kruzic JJ; Windes WE; Muránsky O, 2024, 'On the elastoplastic behaviour and fracture of graphite and C/C composites: experiments and numerical simulations', in 11th Australasian Congress on Applied Mechanics Acam 2024, pp. 81 - 87

Conference Papers | 2024

Wong VC; Holmes R; Muránsky O; Koshy P; Sorrell CC; Slater SL; Wood CA, 2024, 'Development and characterisation of ultra-high temperature ceramics (UHTCs) for extreme operating conditions', in 11th Australasian Congress on Applied Mechanics Acam 2024, pp. 142 - 158

Conference Papers | 2020

Akrivos V; Smith MC; Muransky O; Ohms C; Youtsos A, 2020, 'A residual stress measurement and numerical analysis round robin on a three-pass slot nickel-base repair weld', in Procedia Manufacturing, pp. 779 - 786,

Conference Papers | 2017

Hamelin CJ; Muránsky O; Smith MC; Edwards L, 2017, 'A comparison of the constitutive response of austenitic and ferritic steels under welding processes', in Materials Science Forum, pp. 83 - 90,

Conference Papers | 2017

Yang C; Muránsky O; Zhu H; Avdeev M; Huang H; Huai P; Zhou X, 2017, 'On development of NiMo-SiC alloys via powder metallurgy for the use in molten salt environment', in 9th Australasian Congress on Applied Mechanics Acam 2017

Conference Papers | 2016

Law M; Bendeich PJ; Muránsky O; Payten WM; Hamelin CJ, 2016, 'Nuclear-related materials and technology research at ANSTO', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP,

Conference Papers | 2016

Muránsky O; Hamelin CJ; Tran M; Braham C; Smith MC, 2016, 'Assessment of welding-induced plasticity in austenitic steel weldments', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vancouver, Canada,, presented at ASME 2016 Pressure Vessels and Piping Conference, Vancouver, Canada,, 17 July 2016 - 21 July 2016,

Conference Papers | 2016

Smith MC; Muransky O; Akrivos V; Angles J, 2016, 'The net task group 6 weld residual stress measurement and simulation round robin in alloy 600/82', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP,

Conference Papers | 2015

Tran MN; Muránsky O; Hill MR; Olson MD, 2015, 'Numerical analysis of weld residual stress in a pressurizer surge nozzle full-scale mockup: The effect of hardening constitutive model and interpass temperature', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP,

Conference Papers | 2014

Hamelin CJ; Muránsky O; Edwards L, 2014, 'The influence of austenite grain size during welding simulations of ferritic steels', in Advanced Materials Research, pp. 512 - 517,

Conference Papers | 2014

Muránsky O; Hamelin CJ; Smith MC; Bendeich PJ; Edwards L, 2014, 'The role of plasticity theory on the predicted residual stress field of weld structures', in Materials Science Forum, pp. 65 - 71,

Conference Papers | 2014

Patel VI; Muránsky O; Hamelin CJ; Olson MD; Hill MR; Edwards L, 2014, 'A validated numerical model for residual stress predictions in an eight-pass-welded stainless steel plate', in Materials Science Forum, pp. 46 - 51,

Conference Papers | 2014

Patel VI; Muránsky O; Hamelin CJ; Olson MD; Hill MR; Edwards L, 2014, 'Finite element modelling of welded austenitic stainless steel plate with 8-passes', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP,

Conference Papers | 2014

Smith MC; Muransky O; Smith D; Do SC; Bouchard PJ; Mathew J, 2014, 'Modelling and measuring residual stresses in pipe girth welds - Lessons from the style framework 7 project', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP,

Conference Papers | 2014

Zrnik J; Muransky O; Sittner P, 2014, 'Deformation behaviour of TRIP steel monitored by in-situ neutron diffraction', in Advanced Materials Research, pp. 25 - 30,

Conference Papers | 2014

Zrník J; Muránsky O; Sittner P, 2014, 'Effect of thermomechanical processing on structure development and mechanical properties of bulk trip steel', in Metal 2014 23rd International Conference on Metallurgy and Materials Conference Proceedings, pp. 448 - 452

Conference Papers | 2014

Zrník J; Muránsky O; Šittner P, 2014, 'Impact of microstructure modification on deformation behaviour of bulk TRIP steel', in Materials Science Forum, pp. 99 - 103,

Conference Papers | 2013

Aird C; Smith M; Kapadia P; Venkata KA; Muransky O, 2013, 'Round robin prediction of residual stresses in the edge-welded beam R6 validation benchmark problem', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP,

Conference Papers | 2013

Dennis RJ; Kulka R; Muransky O; Smith MC, 2013, 'Influence of phase transformations on residual stresses in welded structures', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP,

Conference Papers | 2012

Bendeich PJ; Muránsky O; Hamelin CJ; Smith MC; Edwards L, 2012, 'The impact of axi-symmetric boundary conditions on predicted residual stress and shrinkage in a pwr nozzle dissimilar metal weld', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP, pp. 1139 - 1145,

Conference Papers | 2012

Hamelin CJ; Muránsky O; Bendeich P; Short K; Edwards L, 2012, 'Predicting solid-state phase transformations during welding of ferritic steels', in Materials Science Forum, pp. 1403 - 1408,

Conference Papers | 2012

Hamelin CJ; Muránsky O; Bendeich PJ; Edwards L, 2012, 'Predicting post-weld residual stresses in ferritic steel weldments', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP, pp. 1061 - 1069,

Conference Papers | 2012

Muránsky O; Smith MC; Bendeich PJ; Hamelin CJ; Edwards L, 2012, 'Prediction and measurement of weld residual stresses in thermally aged girth-welded austenitic steel pipes', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP, pp. 1147 - 1156,

Conference Papers | 2012

Smith MC; Muránsky O; Austin C; Bendeich PJ; Edwards L, 2012, 'Optimised modelling of weld metal constitutive behaviour in the NeT TG4 international weld simulation and measurement benchmark', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP, pp. 1125 - 1137,

Conference Papers | 2011

Flores-Johnson EA; Muránsky O; Hamelin CJ; Bendeich PJ; Edwards L, 2011, 'Effect of residual-stress field on the ballistic performance of welded steel plate', in Proceedings of the 9th International Conference on Shock and Impact Loads on Structures, pp. 307 - 312

Conference Papers | 2011

Hamelin CJ; Muránsky O; Luzin V; Bendeich P; Edwards L, 2011, 'Accounting for phase transformations during welding of ferritic steels', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP, pp. 1469 - 1477,

Conference Papers | 2011

Zrník J; Muránsky O; Šittner P; Oliver EC, 2011, 'Deformation behaviour of TRIP steel monitoring by in-situ neutron diffraction', in Key Engineering Materials, pp. 390 - 394,

Conference Papers | 2010

Muránsky O; Barnett MR; Carr DG; Vogel S; Oliver EC, 2010, 'Combined in situ neutron diffraction and acoustic emission of twin nucleation & twin growth in extruded ZM20 Mg alloy', in Materials Science Forum, pp. 149 - 154,

Conference Papers | 2010

Muránsky O; Bendeich PJ; Smith MC; Kirstein O; Edwards L; Holden TM, 2010, 'Analysis of residual stresses in three-pass slot weld (NET-TG4): Finite element modelling & neutron diffraction', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP, pp. 1299 - 1305,

Conference Papers | 2010

Smith MC; Muransky O; Goodfellow A; Kingston E; Freyer P; Marlette S; Wilkowski GM; Brust B; Shim DJ, 2010, 'The impact of key simulation variables on predicted residual stresses in pressuriser nozzle dissimilar metal weld mock-ups. Part 2 - Comparison of simulation and measurements', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP, pp. 1495 - 1511,

Conference Papers | 2010

Smith MC; Muránsky O; Bendeich PJ; Edwards L, 2010, 'The impact of key simulation variables on predicted residual stresses in pressuriser nozzle dissimilar metal weld mock-ups. part 1 - Simulation', in American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP, pp. 1483 - 1494,

Conference Papers | 2009

Muransky O; Barnett MR; Carr DG; Vogel S; Oliver EC, 2009, 'Combined in situ neutron diffraction and acoustic emission of twin nucleation & twin growth in extruded ZM20 Mg alloy', in Akiniwa Y; Akita K; Suzuki H (eds.), MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION, TRANS TECH PUBLICATIONS LTD, JAPAN, Mito, pp. 149 - +, presented at 5th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, JAPAN, Mito, 10 November 2009 - 12 November 2009,

Conference Papers | 2008

Muránsky O; Carr DG; Šittner P; Oliver EC; Dobroň P, 2008, 'In-situ neutron diffraction studies of the pseudoelastic-like behaviour of hydrostatically extruded Mg-Al-Zn alloy', in Materials Science Forum, pp. 107 - 112,

Conference Papers | 2008

Muránsky O; Šittner P; Zrnik J; Oliver EC, 2008, 'The structure dependence of deformation behavior of transformation-induced plasticity-assisted steel monitoring by in-situ neutron diffraction', in Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, pp. 3097 - 3104,

Conference Papers | 2008

Zmik J; Muransky O; Hornakl P; Stejskal O, 2008, 'Modification of structure and properties of TRIP steel by forging thermomechanical process', in New Developments on Metallurgy and Applications of High Strength Steels Buenos Aires 2008 Proc Int Conf New Developments on Metallurgy and Applications of High Strength Steels, pp. 235 - 241

Conference Papers | 2007

Zrnik J; Muransky O; Stejskal O; Hornak P, 2007, 'Thermomechanical processing controlling the austenite transformation in Si - Mn TRIP steel', in Key Engineering Materials, pp. 41 - 44,

Conference Papers | 2006

Koo MS; Xu PG; Li JH; Tomota Y; Muransky O; Lukas P; Adachi Y, 2006, 'In situ neutron diffraction during thermo-mechanically controlled process in low alloy steels', in Solid State Phenomena, pp. 419 - 424,

Conference Papers | 2006

Lukáš P; Muránsky O; Polák J; Jenčuš P, 2006, 'In situ neutron diffraction study of the low cycle fatigue of the α-γ duplex stainless steel', in Zeitschrift Fur Kristallographie Supplement, pp. 357 - 362,

Conference Papers | 2006

Šaroun J; Kočík J; Garcia-Matres E; Muraňský O; Strunz P, 2006, 'Characterisation of radiation-induced precipitates in reactor pressure vessel steels', in Zeitschrift Fur Kristallographie Supplement, pp. 393 - 398,

Conference Papers | 2005

Muránsky O; Lukáš P; Sittner P; Zrník J; Jenčuš P; Nový Z, 2005, 'In-situ neutron diffraction studies of phase transformations in Si - Mn TRIP steel', in Materials Science Forum, pp. 275 - 280,

Conference Papers | 2005

Zrník J; Muránsky O; Lukáš P; Sittner P; Nový Z, 2005, 'In-situ neutron diffraction analysis of phase transformation kinetics in TRIP steel', in Materials Science Forum, pp. 339 - 344,

Conference Papers | 2004

Zrnik J; Muransky O; Lukas P; Sittner P; Novy Z, 2004, 'In-situ neutron diffraction analysis of phase transformation kinetics in TRIP steel', in Naka M; Yamane T (ed.), NEW FRONTIERS OF PROCESSING AND ENGINEERING IN ADVANCED MATERIALS, TRANS TECH PUBLICATIONS LTD, JAPAN, Kyoto, pp. 339 - 344, presented at International Conference on New Frontiers of Process Science and Engineering in Advanced Materials/ 14th Iketani Conference, JAPAN, Kyoto, 24 November 2004 - 26 November 2004,

Preprints |

Chen L; Wang Z; Zhu H; Burr PA; Qu J; Huang Y; Balogh L; Preuss M; Muránsky O, On the Microstructure and High-Temperature Stability of Nano-Grained Zircaloy-4,

Preprints |

Zhou D; Bu Y; Muránsky O; Geng H; Sun B; Yang C; Zhang D, Annealing-Induced Grain Refinement and Hardening in Ultrafine-Grained Al and Al-Mg Alloys,

DP210103103 - Reliability and design of 3D printed metal structures - Prof Kim Rasmussen, A/Prof Hao Zhang, Prof Anna Paradowska, Adj A/Prof Ondrej Muransky, Prof Leroy Gardner

���������¼�

Follow

Dr Ondrej Muransky

Follow me

��¼�